Quantum-data 882E Manuel d'utilisateur télécharger pdf (Page 16)

15 882E Quick Start Guide - HDCP Compliance Testing with Encryption Status Tester (EST) - P/N 68-00210 Rev. B

2. Activate the HDMI-H interface on the output port as follows:

a. Press the Interface key. A listing of signal interfaces appears on the generator’s

display as shown below.

b. Choose the HDMI-H item by pressing the adjacent soft key. The interface is

activated and the display is shown below.

Alternatively, to activate the interface through the command line interface, enter the

following commands:

XVSI 4 // Activates the HDMI-H interface

ALLU // Applies the interface setting to the generator

3. Press the Tools key and choose the Reports item by pressing the adjacent soft key.

The following is displayed on the generator’s LCD.

4. Select HDCP to access the HDCP compliance test menu.

The following is displayed on the generator’s LCD.

5. Select EditPCP to define the capabilities of the HDCP device under.

The following is displayed on the generator’s LCD.

VGA

HDMI-D

CVBS

S-VIDEO

SDI

HDMI-H

VGA

HDMI-D

CVBS

S-VIDEO

SDI

*HDMI-H

EDID Packets

Misc HDCP

!CompRpt EditPCP

Source :DUT Type

+Source_Out_OnlyRep

:Source_Authe_Cnt

:Source_Max_KSV

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Pas de commentaire

Quantum-data 882E Manuel d'utilisateur Page 16